手板，簡單來說就是不需要開模具的情況下，只根據客戶提供的3D圖紙做出來的產品模型，只是用來檢測產品的外觀或結構是否合理。

The hand board is simply a product model made only according to the 3D drawings provided by the customer without the need to open the mold. It is only used to check whether the appearance or structure of the product is reasonable.

在不同的地區有不同的叫法通常都是一些研發和設計產品的行業都需要做手板，做濟南手板的目的就是為了驗證產品的可行性，如果不做手板來測試產品是否合理，就直接開模去做，一旦批量生產出來的產品結構不合理這樣的話哪些產品都沒有用了，甚無法使用，直接生產一旦有缺陷將全部報廢，而且開一套模具的是非常昂貴的，而做手板的比開模具的低很多。

There are different names in different regions. Usually, some industries that develop and design products need to make hand boards. The purpose of making Jinan hand boards is to verify the feasibility of products. If you do not make hand boards to test whether the products are reasonable, you can directly open the mold to do it. Once the structure of products produced in batches is unreasonable, which products are useless, or even cannot be used. Once the direct production is defective, all products will be scrapped, Moreover, the price of opening a set of molds is very expensive, and the price of making a hand board is much lower than that of opening a mold.

一、檢驗外觀與結構：通過激光快速成型、CNC數控加工等工藝處理，做出仿真的外觀或結構功能手板，供開發商與設計師檢驗評估優化造型和結構；

1、 Inspect the appearance and structure: through laser rapid prototyping, CNC numerical control processing and other process processing, make a simulated appearance or structure function board for developers and designers to inspect and evaluate the optimized shape and structure;

二、預測模具：制造過程中可能出現的問題：透過手板制作，能發現模具生產中可能發生的問題，避免大幅度改模甚模具報廢，從而降低模具生產的成本和風險。

2、 Prediction of mold: problems that may occur in the manufacturing process: through the handmade, the problems that may occur in the mold production can be found, so as to avoid significant mold changes or even mold scrapping, thus reducing the cost and risk of mold production.

三、參展：仿真度非常高的手板，完全可以代替產品參加各種展覽或進行市場調查，反響不錯，即可轉入模具量產。

3、 Exhibitor: The hand board with very high degree of simulation can completely take the place of products to participate in various exhibitions or conduct market research. If the response is good, it can be transferred to mass production of molds.

以上就是手板的三大功能介紹的相關內容了，希望能夠給您幫助，更多事項就來我們網站http://www.networkcoms.cn進行咨詢了解吧！

The above is the relevant content of the introduction of the three functions of the hand board. I hope it can help you. Please come to our website for more matters http://www.networkcoms.cn Consult and understand!