強度高

High strength

聚氨酯鑄造（復模）的材料有剛性或柔性的塑料。復模的手板模型件通常比注塑件堅韌，并且比3D打印件的強度更好。

The materials used for polyurethane casting (re molding) include rigid or flexible plastics. The prototype parts of the replica are usually stronger than injection molded parts and have better strength than 3D printed parts.

擴展性好

Good scalability

聚氨酯鑄造（復模）工藝適用于數量從一數百的小批量生產。平均而言，一個硅膠硅膠模具可以精確地鑄造約20-25個手板零件，數量因零件設計和材料鑄造而異。

The polyurethane casting (re molding) process is suitable for small batch production in quantities ranging from one to hundreds. On average, a silicone mold can accurately cast approximately 20-25 hand board parts, with the maximum number varying depending on part design and material casting.

材料多

Multiple materials

聚氨酯鑄造（復模）可以提供各種剛性和柔性的材料，可以選擇做軟膠；也可以做ABS、PC等塑膠，目前模世家手板模型還攻克了各種耐高溫和防火材料。而且復模零件的顏色可根據您的要求進行混合選擇。

Polyurethane casting (replica) can provide various rigid and flexible materials, and can be chosen as a soft adhesive; It can also be made of ABS, PC and other plastics. Currently, Moshijia's hand board models have also conquered various high-temperature and fire-resistant materials. And the colors of the replica parts can be mixed and selected according to your requirements.

交期快

Fast delivery time

聚氨酯鑄造（復模）因為模具制作時間短，可以根據您的原型很快做出硅膠模具，

Polyurethane casting (re molding) can quickly make silicone molds based on your prototype due to the short mold production time,

在5-15個工作內就可以出貨， 相比同類產品，注塑件的周期都是需要數月才能完成。

It can be shipped within 5-15 working hours, and compared to similar products, the cycle of injection molded parts takes several months to complete.

本文由濟南手板為您提供，我們的網站是:http://www.networkcoms.cn將以全心全意的熱情為您提供服務，歡迎您的訪問！

This article is provided by Jinan Handboard, and our website is: http://www.networkcoms.cn We will provide you with wholehearted enthusiasm and welcome your visit!